1. Rotary shear
High speed rotary shear is designed for cutting the strip in formats at programmed lengths without stopping the strip.
Designed with double eccentric drive (upper and lower blade holder). The movement of both eccentrics / blade holders is synchronized and equipped with sliding reaction arms on roller guides.
- High productions in all format lengths.
- Feeding and cutting without contact with the sheet.
- Automatic regulation of GAP.
- Minimum space required
- No feeding pit necessary.
- Can be installed in any cutting line to achieve increased production and cutting quality.
Minimum cutting tolerance
±0,1mm
Minimum cutting tolerance
±0,5mm
2. Flying shear
The Flying Shear is designed to cut the strip in formats at programmed lengths without stopping the strip.
The flying shear is synchronized with the length encoder to produce accurate length sheets. The shear will accelerate to match strip speed and once it reaches the correct sheet length will cut the strip and return to the start position to repeat the process.
Advantage:
- High production in all lengths above 1,500mm.
- Feeding and cutting without contact with the sheet.
- Automatic regulation of GAP.
- Quick change of blades.
- Minimum space required.
- No feeding pit necessary.
- It can be installed in any cutting line to achieve increased production and cutting quality.
2. Flying shear
The Flying Shear is designed to cut the strip in formats at programmed lengths without stopping the strip.
The flying shear is synchronized with the length encoder to produce accurate length sheets. The shear will accelerate to match strip speed and once it reached the correct sheet length will cut the strip and return to the start position and repeat the process.
Advantage:
- High production in all lengths above 1,500mm.
- Feeding and cutting without contact with the sheet.
- Automatic regulation of GAP.
- Quick change of blades.
- Minimum space required.
- No feeding pit necessary.
- It can be installed in any cutting line to achieve increased production and cutting quality.
Minimum cutting tolerance
±0,5mm
3. Direct-Drive Shear
The Direct-Drive Shear performs the up / down cut, driving the upper blade holder directly by means of a C.A. motor. electronically controlled.
The cutting system is type “start-stop”, by means of an accumulation pit and feeder rollers.
Advantages:
- High productions in all lengths.
- Automatic regulation of GAP.
- Quick change of blades.
- Maintenance reduction by avoiding the use of clutch and belts.
- Can be installed in any cutting line to achieve increased production and cutting quality.
Minimum cutting tolerance
±0,1mm